4 Replacement Procedures 4.5 HDD
4-18 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)
Installing the HDD
The following describes the procedure for installing an HDD (See Figure 4-6 to 4-8).
1. Install the HDD holder to the HDD with the following screws.
• M3x4S THIN BIND screw x4
2. Put the HDD ASSY into the HDD slot and connect it to the connector CN1800 on the
system board.
3. Install the HDD slot cover and secure it by using the following screws.
• M2.5x6B THIN BIND screw x1
To Next Page
Loading...
