4 Replacement Procedures 4.22 Wireless LAN Antenna/Speaker/Hinge
2. Remove the following screw securing the LCD harness holder to remove it.
• M2x4Z SUPER THIN screw x1
Figure 4-45 Removing LCD harness Holder
3. Remove the following screws securing the display cover to the hinges.
• M2.5x6C PSP TIGHT screw x4
• M2x5C SUPER THIN screw x2
4. Remove the display cover from the hinges.
LCD harness Holder M2x4Z SUPER THIN
M2.5x6C PSP TIGHT
M2.5x6C PSP TIGHT
M2x5C SUPER THIN
Display cover
Insulator
slot
Figure 4-46 Removing display cover
4-64 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)
To Next Page
Loading...
