4 Replacement Procedures 4.22 Wireless LAN Antenna/Speaker/Hinge
8. Remove the following screws securing the optical drive cover from the back of the
display assembly. To remove the optical drive cover, pull it out to the right hinge first.
• M2.5x2.8B U-THIN BIND screw x3
• M2.5x4B THIN BIND screw x2
M2.5x2.8B U-THIN BIND
Optical Drive Cover
M2.5x4B THIN BIND
M2.5x4B THIN BIND
“A”
Figure 4-48 Removing Optical drive cover
4-66 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)
To Next Page
Loading...
