Toshiba Satellite A50S Series - Page 319

4.23 Fluorescent Lamp 4 Replacement Procedures
10. Stick the protection cover G (B), protection cover S (A), fixing tape (C) and fixing tape
for lead wire (D).
(A)
The tape MUST NOT appear on the display.
Stick the tape according to the outline of
the LCD module. Make sure the tape does
not appear on the side of the module.
Do not make the tape over the top of the module.
0 to 1 mm
(D)
(C)
(B)
Figure 4-84 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (23)
Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 4-97