4 Replacement Procedures 4.4 HDD
HDD pack
M2 5x3 black flat head screw.
HDD cover
Figure 4-4 Removing the HDD pack
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble
or replace the HDD pack only if it fails.
4. Place the HDD pack on a flat surface (such as a desk), and remove the four M2x2
black flat head screws.
5. Place the HDD pack on a flat surface (such as a desk), and remove the chassis.
4-14 Satellite/Satellite Pro/C650D/C655D Maintenance Manual
To Next Page
Loading...
