4.4 HDD 4 Replacement Procedures
4.4 HDD
Removing the HDD
CAUTION: Do not press on the top or bottom of the drive.
Applying such pressure can either corrupt the data in the drive or
damage the drive.
Remove the HDD (hard disk drive) according to the following procedures and Figures 4-4, 4-
5.
1. Release the one HDD cover screw securing the HDD cover.
2. Release the M2.5x3 black flat head screw securing the HDD pack.
3. Remove the HDD pack by pulling the pack, following the direction of the arrows.
Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-13
To Next Page
Loading...
