Toshiba Satellite C655D - 4.8 Top Cover

4 Replacement Procedures 4.8 Top Cover
4.8 Top Cover
Removing the Top Cover
Remove the top cover according to the following procedures and Figures 4-10 and 4-11.
Turn the computer upside down and remove the following 20 screws:
- Sixteen M2.5x6 black flat head screws.
- Four M2x2 black flat head screws.
M2 5x6 black flat head screw.
M2 5x6 black flat head screw.
M2 x2 black flat head screw.
M2 x2 black flat head screw.
Figure 4-10 Removing the screws from the bottom of the computer
2. Turn the computer right side up.
3. Disconnect the touch pad board flat cable from CN280.
4. Disconnect the power board flat cable from CN200.
5. Disconnect the speaker cable from CN600.
6. Lift up the top cover.
4-24 Satellite/Satellite Pro/C650D/C655D Maintenance Manual