4. 10 System board 4 Replacement Procedures
Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4--29
Installing the System Board
Install the System Board according to the following procedures and figure 4-13.
NOTE:
Be careful of the eject button for the PC card. It can be damaged when installing the
system board. Make sure it is pushed in.
1. Connect the DC-IN cable to CN6000 on the system board
2. Seat the system board in the correct position.
3. Secure the system board with one M2.5x6 black flat-head screw.
4. Secure the FAN with M2x3 black flat head screw..
To Next Page
Loading...
