4 Replacement Procedures  4.14 FL Inverter B
oard
 
4.14  FL Inverter Board (for CCFL panel) 
Removing the FL Inverter Board 
Remove the FL inverter board according to the following procedures and Figures 4-24. 
 
HV cable
LCD FL cable
FL inverter board
 
Figure 4-
24 
 Removing the FL inverter board 
1.  Lift the LCD module, FL inverter board and disconnect the LCD/FL cable from the 
LCD/FL connector. 
2.  Disconnect the HV cable from the HV connector. 
3.  Remove the FL inverter board. 
4--38                                                                     Satellite/Satellite Pro/C650D/C655D     Maintenance Manual