Replacement Procedures
4.3 PC card
Remove a PC card
The following describes the procedure of removing a PC card (See Figure 4-2-1).
CAUTION: Insert or remove a PC card according to the instructions of PC card manual
or the manuals of the computer system you are using.
1. Push the eject button twice, It will pop out PCMCIA Card when you release it.
2. Grasp one of PC card and remove it.
NOTE: If a PC card is not inserted all the way, the eject button may not pop out. Be
sure to push a PC card firmly and press the eject button again.
Eject Button
Figure 4-2-1 Remove a PC card
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
4-11
To Next Page
Loading...
