Toshiba Satellite M300 - Wireless LAN Card

Replacement Procedures
4.5 Wireless LAN card
Remove a Wireless LAN card
The following describes the procedure of removing a Wireless LAN card (See Figure 4-5).
1. Remove the following screw of wireless cover securing wireless LAN card cover and
remove it. And remove screw of wireless board
• 2.5.0 x 4.0B BIND screw x3
2. Disconnect the wireless LAN antenna cable from the connectors on a wireless LAN
card.
3. Open the left and right latches to remove a wireless LAN card from the connector on
the system board.
Wireless LAN card
cover with 3 screws
CN30
Wireless LAN with 2 screws
Wireless LAN antenna
cabl
e
Figure 4-5 Remove a wireless LAN card
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
4-17