Toshiba Satellite M300 - Display Assembly

Replacement Procedures
4.10 Display assembly
Remove the display assembly
The following describes the procedure for removing the display assembly (See Figure 4-18 to
4-22).
1. Close the display and turn the computer upside down.
2. Open the MINIPCI Door and remove the wireless LAN screws and antenna connector.
Wireless LAN
antenna connecto
r
Figure 4-18 Remove the Wireless LAN antenna connector
3. Open the display and removing the k/b holder and keyboard. (please refer figure 4-
9,figure4-10, figure4-11).
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
4-33