Replacement Procedures
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
4-26
Install the keyboard
The following describes the procedure for installing the keyboard (See Figure 4-8 to 4-9).
1. Turn the keyboard upside down and place it on the palm rest as its face down. Connect
the keyboard flexible cable to the connector on the system board.
2. Secure the KB with the following screw
• M2.5×3.0B BIND screw x2
3. Install the KB Holder
4. Turn the computer upside down
5. Secure the KB Holder with the following screw
• M2.0x3.0B Flat BIND screws x2
6. Install battery.
To Next Page
Loading...
