Toshiba Satellite M300 - Page 213

Replacement Procedures
M2.5
×
5.0 4 screws
Figure 4-30 Remove the display mask
3. Pull out one insulator and peel off the other one adhered to the FL inverter.
4. Disconnect the LCD harnesses from the connectors CN1 on the FL inverter.
5. Disconnect the HV harnesses from the connectors CN2 on the FL inverter.
6. Remove the FL inverter while peeling off the double-sided tape.
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
50