Strata CIX670
CIX670 Remote Expansion Cabinet
34 Strata CIX General Description 12/07
Strata CIX670 Rack Mount
The Strata CIX Rack Mount cabinets consist of a Base cabinet
(CRSUB672A) and Expansion cabinets (CRSUE672A). These
cabinets are deeper, narrower, and designed specifically to fit
standard (customer-supplied) 19” racks (shown right). The
cabinets are made of plated sheet metal, dark gray in color with
black cover plates.
These cabinets support the same features as
the floor/wall-mountable CIX670 cabinets.
A CIX670 system can expand from one to seven cabinets
using the same processors and interface cards as the CIX670
floor/wall-mountable cabinets. The power factors and slot
configuration rules are also the same as the floor/wall-
mountable CIX670.
The difference between the floor/wall mount and the rack
mount cabinets is the size for the Base and Expansion cabinets,
the power supply that is installed in the cabinets, and a unique
power strip for rack mount cabinets (BRPSB120A and the
240V version).
Toshiba does not support mixing the floor/wall-mountable
CIX670 cabinets with the rack mountable cabinets. The 19
inch-wide rack and rack screws must be supplied by the dealer.
Interface cables plug into the front of the station and trunk
cards and fold under each cabinet to exit the rear of the
cabinets.
Basic Specifications
The following table lists the parts and basic specifications of the CIX670 Rack Mount Cabinets.
Dimensions of Base (CSRUB672A)
and Expansion (CSRUE672A)
Cabinet
Height: 10.5 inches (267mm)
Width: 1.58 feet (483mm—with bracket)
Depth: 1.17 feet (358mm)
Weight of Base and Expansion
Cabinet
22.04 lbs. (10 kg)
Power Supply Unit (PSU) BRPSU672A (initially built in) – can also be ordered for spares
19" Rack Installation Dimension IEC297-1 (EIA RS 310-D)
465.1mm (front face screw pitch – width)
Installation Cannot be floor or wall mounted.
Optional Equipment Power Strip Box
1
1. Power strip boxes for floor/wall-mountable cabinets cannot be used for Rack Mount cabinets.
BRPSB120A
BRPSB240A
Reserve Power Battery Distribution Box
2
2. Reserve batteries are connected using the same battery distribution box and battery cables as the CIX670
floor/wall-mountable cabinets.
BBDB1A
From PSU to Battery Cable PBTC1A-3M
From BBDB to Battery Cable BBTC1A-2.0M
AC240V Power Supply Cord BACL240A
To Next Page
Loading...
