Telephones and Peripherals
Telephone Button Expansion Options
Strata CIX General Description 12/07 61
Telephone Button Expansion Options
Add-on modules connect directly to the telephones and do not require an additional interface
circuit (port). Up to two Add-on-Modules can be attached to a telephone to supplement the
telephone's 10 or 20 buttons.
The CIX/CTX supports a limited number of Add-on-Modules per cabinet (see Table 11 on page 37
for the capacities of different common control units).
Expansion options for the Toshiba DP5000-series telephones are described below:
LCD Add-on -Module (LM5110)
The LM5110 adds 10 programmable LCD feature buttons
to the 5000-series telephones, these buttons can be
assigned as CO line, Directory Number, DSS, One Touch,
Speed Dial or any other flexible feature.
The LM5110 supports backlight and LCD labels, it can be
connected to any 5000-series telephone (except DP5008).
Key Module (KM5020)
The KM5020 adds 20 programmable feature buttons
to the 5000-series telephones. These buttons can be
assigned as CO line, Directory Number, DSS, One
Touch, Speed Dial or any other flexible feature.
Digital DSS Add on Module (DDM5060)
The DDM5060 console (shown right) is for system
attendants.
The DDM5060 operates alongside a digital telephone
and has 60 programmable feature buttons. These buttons
can be assigned as CO Line, Directory Number, DSS,
One Touch, Speed Dial or any other flexible feature. The
DDM5060 is not compatible with the DP5008.
Up to eight consoles can operate with one digital
telephone depending on CIX system (See
Table 11 on
page 37).
The DDM5060 console uses LEDs to indicate call and feature status; the DSS has dual red and
green LEDs to help further define status, such as station in DND status. The DDM5060 console
connects to a digital station port on the ADKU, BDKU, or BDKS card.
LM5110 shown with DP5130 Telephone
KM5020 shown with DP5132-SD Telephone
DDM5060 shown with DP5132 Telephone
To Next Page
Loading...
