Toshiba Strata DK - Page 73

Features
Speed Dial
Strata DK Digital Telephone 5/99 61
➤ To clear a telephone number on a Station Speed Dial button
➤ Repeat the previous procedure on See Page 60, skipping Step 3.
➤ To program one-touch telephone number dialing
➤ Repeat the previous procedure on See Page 60, except for Step 3. For Step 3, press [PDN]
+ CO line access code before the telephone number. See “CO Line Access Codes” on page
109.
➤ To make a call using a Speed Dial button or access code
To store longer
dialing strings, see
“Speed Dial Number
Linking” on Page 65.
To insert a pause or
flash signal in the
number, see “Speed
Dial Pause and Flash
Storage” on Page 64.
4. Press
5HGLDO. The number is stored.
1. Lift the handset.
2. Access a CO line (if
necessary).
If your
6' button has
been programmed to
automatically do this,
skip this step.
3. Press
6'
...or 6SHHG'LDO.
Then enter a Speed
Dial access code (see
Table 15 on page
111).
The system dials the telephone number assigned to the button/
code. If your
6' button is “one-touch,” as explained above,
skip Step 1.