T2150 Series
4.7 Top Cover, Display Assembly, and Speaker
Removing the Top Cover, Display Assembly, and Speaker
To remove the T2150 series top cover, follow the steps below and refer to figures 4-15 to
4-17.
1. Turn the computer's power off. Disconnect the power cable and all external cables
connected to the T2150 series.
2. Remove the battery pack, optional PCMCIA card, optional memory module,
keyboard, and hard disk drive as described in sections 4.2 through 4.6.
3. Turn the computer over and remove three M2.5x8 silver screws securing the
cover of the T2150 series (figure 4-15).
Figure 4-15 Removing the three screws
To Next Page
Loading...
