Toshiba T2150 series - Procedure 3 AC PS Unit Replacement Check

2-8
T2150 Series
Procedure 3 AC PS Unit Replacement Check
The PCB incorporates the system board and the power supply board. Power is supplied to
the power supply board through the AC IN plug located on the AC PS unit. Replace the AC
PS unit if it is damaged.
Refer to chapter 4 for instructions on how to disassemble the T2150 series, and then perform
the following check:
Check 1 Replace the AC PS unit with a new one and restart the system. If the problem still
exists, other FRUs may be damaged.