Toshiba TC-net 100 - Twisted-Pair Cable Connection

22 TC-net 100 Installation and Wiring Manual
Chapter 4 Installation and Wiring of TC-net 100 Parts
4
4.1.2 Twisted-pair cable connection
Connect twisted-pair cables to the RJ modular connectors (TX-0, DUAL MENT).
(1) Remove the dust cover from the modular connector to connect. Hook the top edge of
the dust cover with a fingernail, and pull it out.
Figure 4-4 Removing Dust Cover from Modular Connector
(2) Insert a twisted-pair cable into the RJ45 connector till it clicks.
Figure 4-5 Connecting Twisted-Pair Cable
(3) Clamp the twisted-pair cable.
Optical shared hub unit
Dust cover
Optical shared hub unit
Twisted-pair cable
moduler connector