Toshiba TC-net 100 Installation And Wiring Manual

6F8C0942 25
4.1 Installation and Wiring of Optical Shared Hub Unit
4
4.1.4 AC Power cable connection
AC power (95 VAC to 250 VAC, 50/60 Hz) is received from an external source through
the 3P inlet.
(1) Insert the supplied AC power cable into the 3P inlet of the optical shared hub unit. Do
not supply power in this process.
Figure 4-9 Connecting AC Power Cable
(2) Insert the AC power cable all the way and fit the cable clamp over the power cable.
Figure 4-10 Fastening Cable Clamp
AC inlet
Optical shared hub unit
AC power cable
AC power cable
Optical shared hub unit
Clamp

Toshiba TC-net 100 Specifications

General

Brand	Toshiba
Model	TC-net 100
Category	Network Hardware
Language	English