Toshiba TDP-P8 - USER CONTROLS AND REMOTE OPERATION; Control Panel and Remote Control Basics

18
User Controls
Using the Control Panel
On / Standby

Refer to the “Power On/Off the Projector” section on page 24.
Input

Press “Input” to choose RGB, Component-p, Component-i, S-Vid-
eo, Composite Video and HDTV sources.
Menu

Press “Menu” to launch the on screen display (OSD) menu. To
exit OSD, press “Menu” again.
Keystone +/-
/

Adjusts image distortion caused by tilting the projector (±15 de-
grees).
Enter

Confi rm your selection of items.
Auto Set

Automatically synchronizes the projector to the input source.
Remote ControlControl Panel
Control Panel & Remote Control
There are two ways for you to control the functions: Re-
mote Control and Control Panel.