Use this menu to set screen display-related items.
 (Full): Display with 1024 × 768 dot resolution
 (Thru): Display with sampling resolution (for computer input)
 (Wide): Wide-screen display (for Video, S-video, and Y/P
Select one of the languages below to use for displaying the menu and 
English/Français/Deutsch/Italiano/Español/Português
Screen to display when there is n o input signal (Logo) 
Display icons as function guides
Display start-up screen when power is turned on
If “Thru” is selected for 
, portions exceeding the native resolution (1024 
768 pixels) will not appear on the screen. Note that for RGB signals with clock frequency 
140MHz or lower, all input pixel signals are sampled. However, if the clock speed is 
higher than this, the RGB pixel signal is thinned before sampling.
use the screen size setti
g function on commercial video software, broadcast or 
cable-broadcasting progra
ms to display images with the varying aspect ratio exce
urpose of your private viewing and listening, it 
may infringe the copyright protected 
Using the menu (Continued)