8
IMPORTANT SAFETY INSTRUCTIONS (Continued)
are required, be sure the 
service technician has used 
replacement parts specifi ed by the 
manufacturer or have the same 
characteristics as the original part.
Unauthorized substitutions may 
result in fi re, electric shock, or 
(Replacement of the lamp only 
should be made by users.)
Upon completion of any service 
or repairs to this product, ask 
the service technician to perform 
safety checks to determine that 
the product is in proper operating 
Do not leave thermalpaper 
of the unit or near the air 
The heat from the unit could erase 
the information on the thermal 
paper, or cause deformation or 
Do not use the product in 
a closed installation state.
Do not place the product in a box 
or in any other closed installation 
state. Otherwise it may overheat. 
This could result in a risk of fi re.
Do not look into the laser 
light source of the remote 
control or direct the laser 
damage to the eyes or sight.