6) Sub brightness for Wireless/Card (TDP-SW20 Only)
Change input mode to Wireless/card and insert the memory card,
the following screen appears.
Select the file of XGA_16_255.jpg and press [Enter] button.
Press [Return] and [Down] buttons simultaneously. The following menu appears.
Notes: For it disappears, press [Return] button.
For it initialize the values, press [Setup] button.
Press [Enter] button of the projector.
Press [Return] and [Down] buttons simultaneously.
When the adjustment is successfully completed, values changes
from default [63]. (EX. The following menu)
If it fails, values return to default [63].
Press [Return] button.
31
To Next Page
Loading...
