7) Sub contrast for Wireless/Card (TDP-SW20 Only)
Press [Return] button, the following menu appears
Select the file of XGA_240_255.jpg and press [Enter] button.
Press [Return] and [Down] buttons simultaneously. The following menu appears.
Notes: For it disappears, press [Return] button.
For it initialize the values, press [Setup] button.
Select the Sub contrast item by pressing [Up] or [Down] button.
Press [Enter] button of the projector.
Press [Return] and [Down] buttons simultaneously.
Select the Sub contrast item by pressing [Up] or [Down] button.
When the adjustment is successfully completed, values changes
from default [127]. (EX. The following menu)
If it fails, values return to default [127].
Press [Return] button.
32
To Next Page
Loading...
