Toshiba TE Series - 4.2.9 Bypass Contactor Control; 4.2.9.a Independent Bypass Contactor Control

Basi
c
I
nsta
l
l
at
i
on and Operat
i
on G
u
i
de T
E
Ser
i
es D
i
g
i
ta
l
S
olid
S
tate
S
o
f
t
S
tarters 1
8
–
1
2
50A

26|Page

Fn # Group Function Description Adjustment / Display Range
Setting
Increments
Factory
Setting
Setting
F040
Current and Ground Fault Protection
Current Imbalance Trip
0 = Disabled, or
5 - 30% imbalance
1% 0 Disabled
F041 Current Imbalance Trip Delay 1 - 20 seconds 1 second 2 seconds
F042 Over Current Trip
0 = Disabled, or
100 - 300% of motor FLA
1% 0 Disabled
F043 Over Current Trip Delay 1 - 20 seconds 1 second 1 second
F044 Under Current Trip
0 = Disabled, or
10 - 90% of motor FLA
1% 0 Disabled
F045 Under Current Trip Delay 1 - 60 seconds 1 second 2 seconds
F046 Ground Fault Trip
0 = Disabled, or
5 - 90% of CT ratio from Fn 74
1% 0 Disabled
F047 Ground Fault Trip Delay 1 - 60 seconds 1 second 2 seconds
F048
Lockouts, Reset and Internal Protection
Coast Down (Back Spin)
Lockout Timer
0 = Disabled, or 1 - 60 minutes 1 minute 0 Disabled
F049 Maximum Starts per Hour 0 = Disabled, or 1 – 10 starts 1 0 Disabled
F050 Minimum Time Between Starts 0 = Disabled, or 1 - 60 minutes 1 minute 0 Disabled
F051 Internal Protection Settings 1 – 255 1 126
F052
Auto Reset
on Selected Faults
Fault Preferences 1 – 12
See Fault Reset Selection Table
1
4:
Phase Loss
only
F053 Auto Reset Attempts 0 = Disabled, or 1-10 attempts 1 1
F054
Restart Delay Time Value
Readout (for F028)
0-999 Seconds 1 0
F055
Coast Down Timer Value
for F048
1-3600 Seconds 1 0
F056
Starts Per Hour Timer Value
for F049
1-3600 Seconds 1 0
F057
Starts Per Hour
For F049
1-10 Starts 1 0
F058
Time Value Between Starts
for F050
1-3600 Seconds 1 0
F059
Thermal Capacity to Start
for F005
0-100 % Thermal Capacity 1 0
F060
Output Relays
Aux Relay 1 setting
Operation # 1 – 27: see
”Aux. Relay Settings Chart”
1 1
F061 Aux Relay 2 setting
Operation # 1 – 27: see
”Aux. Relay Settings Chart”
1 2
F062 Aux Relay 3 setting
Operation # 1 – 27: see
”Aux. Relay Settings Chart”
1 16
F063
Aux. Relay Delay Timer
(for Operations 22-26)
0 (Disabled), or 1-999 seconds 1 second
0
No Delay
F064 Reserved for factory use
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com