115
Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
Sample system power mode settings
5 Click OK, then close the Control Panel.
For more information about the Power Saver utility, see “PC
Diagnostic Tool” on page 172.
Starting again after Shut down
To start the computer up again, press the power button until
the on/off light changes to green.
Using Hibernation
Hibernation mode shuts the computer down completely, but it
first saves the current settings and configuration of the
computer to the hard disk. Since Hibernation mode does not
require power to maintain the saved information, the system
settings are retained indefinitely. Restoring information from
the hard disk takes longer than restoring it from memory.
When you start up again, the computer runs a self-test, loads
NOTE
To Next Page
Loading...
