171
Toshiba Utilities
TOSHIBA SD Memory Boot Utility
5.375 x 8.375 ver 2.3
TOSHIBA SD Memory Boot Utility
In order to boot from an SD card, you must make the card SD
card bootable. To do so, run the Toshiba SD Memory Boot
Utility.
This utility allows you to easily format SD Memory Cards.
Refer to the online help documentation within the application
for any additional help.
To start the utility, click Start, All Programs, Toshiba,
Utilities, and click SD Memory Card.
The TOSHIBA SD Memory Boot Utility screen appears.
Sample TOSHIBA SD Memory Boot Utility screen
1 Attach a USB floppy drive to your computer, and insert a
bootable floppy disk.
2 Insert the SD card
Be sure to back up your data before performing this procedure
as data on the drive may be lost.
NOTE
To Next Page
Loading...
