129
Mobile Computing
Changing batteries
5.375 x 8.375 ver 2.3
Changing batteries
When handling battery packs, do not drop or knock them.
Also, be careful not to damage the casing or short-circuit the
terminals.
To change the battery:
1 Save your work, then shut down your computer
completely using the Shut down or Turn Off command.
2 Unplug the computer.
3 Close the display panel and remove any cables you may
have connected.
4 Turn the computer upside down.
5 If the battery lock is in the locked position, slide it to the
unlocked position.
6 Slide the battery release latch to release the battery.
Sample battery release latch
1
To Next Page
Loading...
