93
Learning the Basics
Using the TouchPad™
5.375 x 8.375 ver 2.3
❖ For uppercase letters, hold down both Fn and Shift while
you type the letters.
To use the numeric overlay keys while the cursor control
overlay is on:
❖ Hold down Shift while you use the numeric overlay keys.
❖ To return to the cursor control overlay, release Shift.
To disable the cursor control overlay, hold down the
Fn key
and press
F10 again. The cursor control mode light on the
keyboard indicator panel goes out.
Using the TouchPad
™
The TouchPad, the small, smooth square cutout located in
front of the keyboard, is sensitive to touch. You to move the
cursor with the stroke of a finger. Simply move your finger on
the TouchPad in the direction you would like to move the
cursor:
❖ To move the cursor to the top of the page, push your
finger forward on the TouchPad.
❖ To move the cursor to the bottom of the page, drag your
finger toward yourself.
❖ To move the cursor to the right side of the page, slide
your finger across the TouchPad from left to right.
❖ To move it to the left side, slide your finger from right to
left.
Because the TouchPad is much smaller than the display
screen, moving your cursor across the screen often means
having to move your finger several times across the TouchPad
in the desired direction.
NOTE
To Next Page
Loading...
