Toshiba Tecra M2V Series - Using Slim Selectbay Modules; Removing a Module from the Slim Selectbay

76
Connecting Other External Devices
Using Slim SelectBay® modules
5.375 x 8.375 ver 2.3
Using Slim SelectBay
®
modules
The Slim SelectBay
®
gives you additional flexibility. By
inserting and removing Slim SelectBay modules, you can
configure your computer for the task at hand without having
to carry unnecessary components with you when you travel.
For example, any one of several modules can be used in the
Slim SelectBay:
❖ DVD-ROM drive
❖ Multi-function drive
❖ Secondary battery
❖ Secondary hard disk drive (HDD)
HINT: Items from this list that did not come with your computer
can be purchased separately. See the accessories information
packaged with your system or visit accessories.toshiba.com.
Removing a module from the Slim SelectBay
®
Use caution when lifting or turning your computer. Failure to
do so may result in damage to components, such as cables,
attached to your computer, or to the computer itself.
1 Do one of the following:
❖ Turn off the computer.
❖ Leave the computer on and hot swap the module. First,
stop the module by clicking the Safely Remove
Hardware icon on the System tray. After the module is
stopped, it is safe to remove it.
NOTE