150
Exploring Your Options
Exchanging data with another computer
5.375 x 8.375 ver 2.3
minutes as it waits for a reply. To avoid this delay, you can
reconfigure Windows to disable the LAN port.
To disable the LAN port:
1 Click Start, then Control Panel.
2 Double-click the System icon, click the Hardware tab,
and then click the Device Manager button.
3 Select the network adapter in Network Adapters.
4 Click the Properties icon on the toolbar.
5 Select the Do not use this device (disable) option from
the Device usage drop-down.
6 Click OK.
Your LAN port is now disabled.
To enable the Ethernet LAN port, repeat steps one through
four. Select the Use this device (enable) check box, and click
OK.
Setting up a wireless connection
For information on how to set up a wireless connection, refer
to the online help that came with your operating system or
your network administrator.
Using the Wi-Fi module
The transmission speed over the wireless LAN and the
distance over which wireless LAN can reach may vary
depending on surrounding electromagnetic environment,
obstacles, access point design and configuration, and client
design and software/hardware configurations.
Wireless fidelity (Wi-Fi) refers to any type of 802.11
network. With an integrated Wi-Fi module, you can access
NOTE
To Next Page
Loading...
