User’s Manual 8-9
Optional Devices
4. One screw in the position which removed the battery pack is removed.
Figure 8-7 Removing a one screw
5. Return to your computer to the upright position.
6. Slide the display latch on the front of the computer to the right and open
the LCD display panel.
7. Slip your finger under a notch at the end of the keyboard brace and lift
up to release latches and remove the keyboard brace.
8. Remove two screws securing the keyboard.
Figure 8-8 Removing the keyboard brace and removing two screws
Screw
Remove a keyboard brace after surely performing step 4. If step 4 is not
performed, there is a possibility of damaging a keyboard brace.
Keyboard brace
Screws
Use a point size 0 Phillips screwdriver.
To Next Page
Loading...
