8-10 User’s Manual
Optional Devices
9. Lift up the back of the keyboard, rotate it toward you and lay in face
down on the palm rest.
Figure 8-9 Rotate the keyboard
10. One screw of Metal brace which is pressing down the keyboard cable is
removed. Metal brace is removed.
Figure 8-10 Removing the metal brace
■ When you move the keyboard forward, do not touch the keys. Doing so
could cause misalignment. Hold the keyboard by the sides and lay it
gently on the palm rest.
■ The keyboard is connected to the computer by a ribbon cable. Be
careful not to apply tension to this cable when you lift up the keyboard.
Do not try to disconnect this cable.
Screw
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
The slot A is reserved for main memory. Use the slot B for expanded
memory. If only one card is installed, use the slot A.
To Next Page
Loading...
