1. Outline
2
Redundant configuration and network connection
OIS-DS/SMART can build the redundant system.
SVR function and PLCS function become a stand-by redundant type,when this is the redundancy.
Maximum 8 OIS functions can be used in the system.
Figure 1.2 Redundant configuration
The number of maximum stations which can be used in the system is shown in Table 1.1.
Table 1.1 System Configuration
OIS + SVR + PLCS function
One or one set of redundancy.
OIS function
Maximum 8 OIS functions can be used in the
system
Necessary Ethernet type is shown in Table 1.2.
Table 1.2 Necessary Ethernet type
The totals of OIS, OIS-DS/SMART and controllers are
more than two units.
LAN for redundant configuration of OIS-DS/SMAR T.
LAN A for controllers or special
Redundant configuration
LAN for redundancy/ LAN for Information
SVR function
PLCS function
OIS function
SVR function
PLCS function
OIS function
PLC
To Next Page
Loading...
Need help?
General
