-2‑
■ General Operation
Danger
Disassembly
prohibited
▼ Never disassemble, modify or repair.
Doing so could result in electric shock, fire and injury. For repairs, call your sales agency.
Prohibited
▼Do not attach this option to any inverter other than the VF-AS1.
Doing so could result in electric shock or fire.
▼ When the inverter is energized, never detach the this option from the VF-AS1.
Doing so could result in electric shock.
▼ Don't place or insert any kind of object into the PDP002Z (electrical wire cuttings, rods,
wires).
Doing so could result in electric shock or fire.
▼ Do not allow water or any other fluid to come in contact with the PDP002Z.
Doing so could result in electric shock or fire.
Mandatory
▼ Turn off the VF-AS1 when installing and wiring the terminal block.
▼ If the inverter begins to emit smoke or an unusual odor, or unusual sounds, immediately
turn power off.
If the equipment is continued in operation in such a state, the result may be fire. Call your
local sales agency for repairs.
■ Transportation & installation
Danger
Prohibited
▼ Do not operate the inverter if it is damaged or any component is missing.
Doing so could result in electric shock or fire. Call your local sales agency for repairs.
▼ Do not place any inflammable substances near the VF-AS1 Inverter.
If an accident occurs in which flame is emitted, this could lead to fire.
▼ Do not install in any location where the inverter could come into contact with water or other
fluids.
Doing so could result in electric shock or fire.
▼ When installing this option, be careful not to touch the leads from parts on the reverse side
of its circuit board.
Doing so could result in injury.
Mandatory
▼ Operate under the environmental conditions prescribed in the instruction manual.
Operations under any other conditions may result in malfunction.
To Next Page
Loading...
Need help?
General