E6581913
37
5.1.7. Identification command (2BH)
Computer → Inverter *The text size is 7 bytes fixed.
CRC16
Inverter
No.
Command
Type of
MEI
Read
device ID
Object ID
low high
2B
(fixed)
0E
(fixed)
00-03
(variable)
00
(fixed)
1) Inverter No. (1 byte) : ---
2) Command (1 byte) : Set the Identification command (2BH fixed).
3) Type of MEI (1 byte) : 0EH fixed.
4) Read Device ID (1 byte) : 00-03H
5) Object ID (1 byte) : 00H fixed.
6) CRC16 (2 bytes) : ---
Inverter → Computer (Normal return) *The text size is variable.
Inverter
No.
Com-
mand
Type of
MEI
Read De-
vice
Id
Degree of
conformity
Number of
additional
frames
Next
object Id
Number of
objects
-----
-
2B
(fixed)
0E
(fixed)
00-03
(variable)
01
(fixed)
00
(fixed)
00
(fixed)
03
(fixed)
------ Id of object no.1 Length of object no.1 Value of object no.1 ------
00
(fixed)
07
(fixed)
“TOSHIBA”
(fixed)
------ Id of object no.2 Length of object no.2 Value of object no.2 ------
01
(fixed)
0C
(variable)
“VFS15-2037PM”
(variable)
Note: See Appendix 3.
------ Id of object no.3 Length of object no.3 Value of object no.3(4 bytes) ------
02
(fixed)
04
(fixed)
“0100”
(variable)
------ CRC16
low high
The total response size is variable.
The three objects contained in the response correspond to the following objects:
Object no.1: Manufacturer name (”TOSHIBA”).
Object no.2: Device reference (ASCII string ; ex. :” VFS15-2037PM”). Note: See Appendix 3.
Object no.3: Device version (4-byte ASCII string; for example: “0100” for version 100).
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
To Next Page
Loading...
