EasyManua.ls Logo

Toshiba TOSVERT VF-S15 series - Communication Parameters

Toshiba TOSVERT VF-S15 series
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E6581913
47
7. Communication parameters
The settings of communication-related parameters can be changed from the operation panel and
the external controller (computer). Note that there are two types of parameters: parameters whose
settings take effect immediately after the setting and parameters whose settings do not take effect
until the inverter is turned back on or reset.
Com-
munica-
tion
Number.
Title Function Adjustment range Unit
Default
setting
Valid Reference
0800
f800
Baud rate
3: 9600bps
4: 19200bps
5: 38400bps
- 4 After reset.
Section
7.1
0801
f801
Parity
0: Non parity
1: Even parity
2: Odd parity
- 1 After reset.
Section
7.1
0802
f802
Inverter number 0-247 1 0 Real time
Section
7.2
0803
f803
Communication
time-out time
0.0:Disabled
0.1-100.0s
0.1s 0.0 Real time
0804
f804
Communication
time-out action
0:Alarm only
1:Trip (Coast stop)
2:Trip (Deceleration stop)
- 0 Real time
Section
7.3
0805
f805
Communication
waiting time
0.00-2.00 0.01s 0.00 Real time
Section
7.4
0806
f806
Setting of master
and slave for
communication
between inveters
0: Slave (0 Hz command issued in
case the master inverter fails)
1: Slave (Operation continued in
case the master inverter fails)
2: Slave (Emergency stop tripping
in case the master inverter fails)
3: Master (transmission of
frequency commands)
4: Master (transmission of output
frequency signals)
- 0 After reset. Chapter 6
0808
f808
Communication
time-out detection
condition
0: Always
1: during communication
2:1+running
- 1 Real time Section 7.3
0810
f810
Frequency point
selection
0:Disabled
1:Enabled
- 0
0811
f811
Communication
command point
selection
0-100% 1% 0
0812
f812
Communication
command point 1
setting
0-fhHz 0.01Hz 0.0
0813
f813
Communication
command point 1
frequency
0-100% 1% 100
0814
f814
Communication
command point 2
setting
0-fhHz 0.01Hz 60.0
Real time
Section
6.13
0829
f829
Selection of
communication
protocol
0: Toshiba inverter protocol
1: Modbus RTU protocol
- 0 After reset. Chapter 3
0856
f856
Number of motor
poles for commu-
nication
1:2poles, 2:4poles, - 8:16poles - 2 Real time Section 8.1
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Table of Contents

Other manuals for Toshiba TOSVERT VF-S15 series

Related product manuals