Tosot DC Inverter U-match Series User Manual

DC Inverter U-match Series Duct Type Unit
4
3 Preparative for Installation
3.1 Standard Accessory Parts
The standard accessory parts listed below are furnished and should be used as
required.
Table 3.1
Indoor Unit Accessories
No. Name Appearance Q'ty Usage
1 Wired Controller
1 To control the indoor unit
2 Screw
2
To fix the base plate of
wired controller and
installation hole of the wall
together
3 Hanger
or
4
To fix the indoor
unit(except for
TU36HFI TU42HFI)
4 Screw
4
To fix the hook on the
cabinet of the unit. (apply
to
TU48HFI)
5
Nut with Washer
8
To fix the hook on the
cabinet of the unit. (apply
to
TU18HFI
TU24HFI
TU30HFI)
6 Nut with Washer
4
To be used together with
the hanger bolt for
installing the unit
7 Nut
4
To be used together with
the hanger bolt for
installing the unit
8 Washer
4
To be used together with
the hanger bolt for
installing the unit
9 Insulation
1 To insulate the gas pipe
10 Insulation
1 To insulate the liquid pipe
11 Fastener
4 To fasten the sponge

Tosot DC Inverter U-match Series Specifications

General

Brand	Tosot
Model	DC Inverter U-match Series
Category	Air Conditioner
Language	English