TOTALIFT Battery Chargers User's Manual
__________________________________________________________________________________________________________________________________________________
Page 16/19
The time indicated by the display is the time elapsed after the charge has been terminated.
This indication is useful when there is two or more forklift operated with FIFO (First In First
Out) rotation: when the user picks up a forklift, he will always chose the one with highest he
time elapsed after charge termination.
The final values of Voltage/cell, time of charge and capacity charged remain stored in memory.
If the red STOP pushbutton is pressed, the display will show these values in sequence.
AUTOMATIC SHUTDOWN ON BATTERY DISCONNECTION
If the battery is disconnected while the charge is in progress, the TOTALIFT OPPORTUNITY
Charger switches off automatically.
EQUALIZE & REFRESH MODES
TOTALIFT OPPORTUNITY chargers have a complete set of programmable equalize & refresh
functions:
− MANUAL EQUALIZE: 4 hours extension of the charge time (selected by user)
− DAILY EQUALIZE: 4 hours extension of the charge time (everyday)
− AUTO EQUALIZE & REFRESH: Weekly equalize cycle + long term battery refresh
MANUAL EQUALIZE
The MANUAL EQUALIZE
function is intended for the users that prefer to manage the
equalization of the batteries personally.
ATTENTION!
The proper programmation of the equalize & refresh modes is important
for the correct operation of the TOTALIFT OPPORTUNITY chargers.
Only expert users should modify these settings.
CAUTION!
NEVER disconnect the battery while it's being charged.
Disconnecting the battery while it's being charged is hazardous
for the user and voids the charger warranty.
To Next Page
Loading...