TOTALIFT Battery Chargers User's Manual
__________________________________________________________________________________________________________________________________________________
Page 19/19
While the charge is in progress, it's possible to shut down the charger by pressing the red
button “MANUAL STOP” on the front panel.
The display will show the message “Stop”:
• The final values of Voltage/cell, Time of charge and Capacity Charged remain stored in
memory. If the “MANUAL STOP” button is pressed again, these values will be displayed in
sequence.
When the charge is terminated manually, the equalization and refresh functions are
automatically disabled.
CAUTION!
NEVER disconnect the battery while it's being charged.
Disconnecting the battery while it's being charged is hazardous
for the user and voids the charger warranty.