About Advanced Features & Operation
Page 23
KEYPAD LOCK - To prevent unauthorized use of the thermostat,
the front panel buttons may be disabled. To disable, or
‘lock’ the keypad, press and hold in the Mode button.
While holding the Mode button in, press the Up and Down
buttons in together. The Locked icon will appear on the
display.
To unlock the buttons, again press and hold the Mode
button. While holding the Mode button in, press the Up
and Down buttons in together. The Locked icon will
disappear from the display.
Press all 3 for
Keypad Lockout
MODE
55
85
HEAT
COOL
Locked
o
o
Pm
12:00
70
We
:
DEHUMIDIFICATION - This option is ONLY available to
modern circuit boards with DEHUM inputs.
On these circuit boards DEHUM is connected to R
to allow high speed fan and disconnected to force low
speed fan. The Intellistat signal Y2 connected to DEHUM
will keep the fan in high speed unless there is a 1st stage
cooling demand, the humidity control is ON, AND the
room humidity is ABOVE the humidity setpoint. In any
other condition (humidity demand, mode off, or heat)
DEHUM will be forced active to enable the highest fan
speed.
To Next Page
Loading...
