During Setup & Programming:
.
(Represented in dark black)
Pressing the Up and Down
buttons will modify the flashing
selection.
Press the SET CLOCK
button.
Press the SET CLOCK
button as above to
return to normal
operation.
Quick Start Set the Clock and Go
Page 5
This thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
S
buttons.
To adjust the
clock or Day use
Press
Am
12:00
:
SET CLOCK
SET CLOCK
MODE
TIP: Hold the Fan button in while pressing up or down to rapidly
advance the hours in Set Clock.
To Next Page
Loading...
Need help?
General
