Totem 10 - Safety Instructions

C.
Safety Instructions
If you smell gas odor:





If you smell products of combustion:




If you
Unit:



Installation, calibration and modification of the gas feed
performed by a Qualified Technician abiding by all applicable national and local
standards as well as by the instructions provided in this Guide.
Installation, calibration or
performed by a Qualified Technician abiding by all applicable national and local
standards as well as by the instructions provided in this Guide.
Installation, calibration or
by a Qualified Technician abiding by all applicable national and local standards
as well as by the instructions provided in this Guide.
It is mandatory to connect the exhaust gas evacuation line of the appliance to
an exhaust gas
requirements in force in the place where the TOTEM® unit is installed. Failure
to comply with said rule poses a serious risk to human and animal safety.
According to the provisions for use,
installed unit in good condition and to ensure the safe and reliable functioning
User’s Guide | TOTEM 10
Safety Instructions
If you smell gas odor:
turn your gas supply valve off;
ventilate the room;
do not operate any electrical device or appliance, including cell phones;
leave the premises and call a Qualified T
echnician or the gas utility
company immediately from a different location. If they are unavailable
or in case of an emergency, call the loc
al Fire Brigade;
if the room is equipped with a gas leak detection system, please report
any possible malfunctioning of said active safety equipment.
If you smell products of combustion:
turn the appliance off;
ventilate the room;
call a Qualified Technician;
if the room is equipped with a smoke/carbon monoxide detection
system, please report any possible malfunctioning of said active safety
equipment.
see water, glycol, oil, or other
fluids’ spills on the floor or near
turn the unit off;
call a Qualified Technician;
shut off the User system’s circuits, if
any, e.g. water or gas supply
Installation, calibration and modification of the gas feed
performed by a Qualified Technician abiding by all applicable national and local
standards as well as by the instructions provided in this Guide.
Installation, calibration or
modification of the electrical system must be
performed by a Qualified Technician abiding by all applicable national and local
standards as well as by the instructions provided in this Guide.
Installation, calibration or
modification of the water syst
em must be performed
by a Qualified Technician abiding by all applicable national and local standards
as well as by the instructions provided in this Guide.
It is mandatory to connect the exhaust gas evacuation line of the appliance to
an exhaust gas
evacuation duct built in compliance with all applicable legal
requirements in force in the place where the TOTEM® unit is installed. Failure
to comply with said rule poses a serious risk to human and animal safety.
According to the provisions for use,
the user has an obligation to keep the
installed unit in good condition and to ensure the safe and reliable functioning
User’s Guide | TOTEM 10
- TOTEM 20
5 of 30
do not operate any electrical device or appliance, including cell phones;
echnician or the gas utility
company immediately from a different location. If they are unavailable
al Fire Brigade;
if the room is equipped with a gas leak detection system, please report
any possible malfunctioning of said active safety equipment.
if the room is equipped with a smoke/carbon monoxide detection
system, please report any possible malfunctioning of said active safety
fluids’ spills on the floor or near
the Totem
any, e.g. water or gas supply
Installation, calibration and modification of the gas feed
system must be
performed by a Qualified Technician abiding by all applicable national and local
standards as well as by the instructions provided in this Guide.
modification of the electrical system must be
performed by a Qualified Technician abiding by all applicable national and local
standards as well as by the instructions provided in this Guide.
em must be performed
by a Qualified Technician abiding by all applicable national and local standards
It is mandatory to connect the exhaust gas evacuation line of the appliance to
evacuation duct built in compliance with all applicable legal
requirements in force in the place where the TOTEM® unit is installed. Failure
to comply with said rule poses a serious risk to human and animal safety.
the user has an obligation to keep the
installed unit in good condition and to ensure the safe and reliable functioning