EasyManua.ls Logo

Totem 10 - Potential Safety Risks

Totem 10
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TOTEM ENERGY
for any damages arising from the incorrect installation or use of the unit and, in
any case
instructions or with all applicable national and local laws.
D.
Potential
Risk
related to Mechanical
Injuries from mechanical
guards protecting the micro cogenerators moving parts
Said activities must,
specifically for said purpose and wearing the appropri
Risk related to Electrical Hazards
Electrical injuries can occur when safety devices are removed from the system,
the
control
Moreover, modifications of the existing
hazards if
performed by unauthorized
Said activities must,
specifically for said purpose and wearing the appropriate PPE.
Risk related to Thermal Hazards
During regular functi
high temperatures.
with frame panels properly mounted, thus preventing access to hot components.
Only
authorized
Risk related to Noise Hazards
In regular op
the frame’s heat
emissions.
Risk
related to Vibration Hazards
The TOTEM® unit is fitted with suitably sized anti
vibration transmission to the structures and installations connected thereto.
The removal
exhaust fumes line and the heating
Risk related to Electromagnetic Radiation/Waves Hazards
The TOTEM
to
electromagnetic
asynchronous generator can cause disturbances temporarily affecting the functioning
of electro-
medical
in close proximity to it.
Risk related to Contact with Hazardous Materials and Substances
On the inside, the TOTEM® module contains chemicals that are essential
proper functioning.
User’s Guide | TOTEM 10
TOTEM ENERGY
shall bear no liability -
either contractual or extra
for any damages arising from the incorrect installation or use of the unit and, in
any case
whatsoever
, from failure to comply with the manufacturers
instructions or with all applicable national and local laws.
Potential
Safety Risks
related to Mechanical
Hazards
Injuries from mechanical
hazards
can occur when the safety devices
guards protecting the micro cogenerator’s moving parts
-
are removed
Said activities must,
therefore, be performed sole
ly by the Maintenance
specifically for said purpose and wearing the appropri
ate PPE.
Risk related to Electrical Hazards
Electrical injuries can occur when safety devices are removed from the system,
control
switchboard, or from the ignition system.
Moreover, modifications of the existing
power supply system
performed by unauthorized
personnel.
Said activities must,
therefore, be performed solely by
Maintenance staff
specifically for said purpose and wearing the appropriate PPE.
Risk related to Thermal Hazards
During regular functi
oning, some of the TOTEM®’s inner components
high temperatures.
The entire appliance must, therefore, work under safe conditions
with frame panels properly mounted, thus preventing access to hot components.
authorized
Maintenance staff are authorized to remove the
units panels.
Risk related to Noise Hazards
In regular op
eration, the whole TOTEM® unit
must work under safe conditions with
the frames heat
-insulation panels properly mount
ed, which lowers the Units noise
related to Vibration Hazards
The TOTE unit is fitted with suitably sized anti
-
vibration mounts to reduce
vibration transmission to the structures and installations connected thereto.
The removal
of anti-vibration fittings from connec
tions with the gas
exhaust fumes line and the heating
system is strictly forbidden.
Risk related to Electromagnetic Radiation/Waves Hazards
The TOTEM
unit complies with Directive
2004/108/EC
electromagnetic
compatibility. However, the electroma
gnetic fields from the
asynchronous generator can cause disturbances temporarily affecting the functioning
medical
devices such as, for example,
pacemakers or hearing aids located
in close proximity to it.
Risk related to Contact with Hazardous Materials and Substances
On the inside, the TOTEM® module contains chemicals that are essential
proper functioning.
Users Guide | TOTEM 10
- TOTEM 20
7 of 30
either contractual or extra
-contractual –
for any damages arising from the incorrect installation or use of the unit and, in
, from failure to comply with the manufacturer’s
can occur when the safety devices
- panels or
are removed
.
ly by the Maintenance
staff trained
Electrical injuries can occur when safety devices are removed from the system,
from
may cause serious
Maintenance staff
trained
oning, some of the TOTEM®s inner components
may reach
The entire appliance must, therefore, work under safe conditions
with frame panels properly mounted, thus preventing access to hot components.
unit’s panels.
must work under safe conditions with
ed, which lowers the Unit’s noise
vibration mounts to reduce
vibration transmission to the structures and installations connected thereto.
tions with the gas
supply grid, the
2004/108/EC
relating
gnetic fields from the
asynchronous generator can cause disturbances temporarily affecting the functioning
pacemakers or hearing aids located
Risk related to Contact with Hazardous Materials and Substances
On the inside, the TOTEM® module contains chemicals that are essential
to its