REMOVING THE GLASS PANEL
Prior to installation, remove the glass panel. Please remove glass panel as per instructions below:
Instructions
1. There are 2 screws in the top vent opening, one on the far left and one on the far right.
1. Remove both screws from the glass panel.
2. After removing screws, lift glass panel UP and STRAIGHT OUT toward you to remove from
2. fireplace. Place glass panel in a soft, dry place.
2. CAUTION: It is recommended that 2 people remove the glass panel to minimize chance of breakage.
Installation
19
800.215.1990 touchstonehomeproducts.com
To Next Page
