CLEANING
• ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning.
• NEVER immerse in water or spray with water. Doing so could result in electric shock, fire,
• or personal injury.
Metal:
• Bu using a soft cloth, slightly dampened with citrus oil-based product.
• DO NOT use brass polish or household cleaners, as these products will damage the metal trim.
Glass:
• Use a good quality glass cleaner sprayed onto a cloth or towel. Dry thoroughly with a paper towel
• or lint- free cloth.
• NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Vents:
• Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
Plastic:
• Wipe gently with a slightly damp cloth and a mild solution of dish soap and warm water.
• NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
MAINTENANCE
• RISK OF ELECTRIC SHOCK! DO NOT OPEN any panels.
• ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning,
• performing maintenance, or moving the fireplace. Failure to do so could result in electric shock,
• fire, or personal injury.
Electrical and Moving Parts:
• The fan motors are lubricated at the factory and will not require lubrication.
• Electrical components are integrated in the fireplace and are not serviceable by the customer.
Storage:
• Store fireplace in a clean, dry place when not in use.
Care & Maintenance
29
800.215.1990 touchstonehomeproducts.com
To Next Page
