WALL MOUNTED INSTALLATION - Continued
3. Mark location of bracket on wall and then mount the bracket to the wall using the supplied screws
4. and dry wall anchors. The hooks in the bracket MUST be pointed away from the wall, upward, and level.
4. Note: Mount bracket to at least 2 studs. If 2 studs cannot be used, ensure that the supplied dry wall
4. anchors are used to ax the bracket to the wall and the bracket is adequately secured before
4. moving to the next step.
Installation
25
800.215.1990 touchstonehomeproducts.com
To Next Page
