TF3 - Manual
45
8. Packaging and Transport
8.1 Unloading the Aircraft Tug
In order to provide the best possible protection for the aircraft tug during transport, it is stored
in a reusable wooden transport box. The following steps are necessary to move the aircraft tug
out of the transport box.
To remove the cover, all bolts on the upper side must be
removed.
The lid can then be removed by two people.
Also loosen the bolts on the sides and then remove the
crossbars which are located under the cover.
Now the bolts on the side of the front wall of the transport
box can be removed.
To Next Page
Loading...